STEP 2:

Drill rebar until you just break through...

Remove the rebar cutter from the hole...

Here's how...

Mount a rotary rebar cutter in a standard 1/2" drill
motor or 1/2" hammer-drill (with the selector in the
rotary-only position); insert the rotary rebar
cutter into the hole and drill through the
embedded rebar.

Tips...

• Don't force the rebar cutter through the rebar.
• Follow the RPM schedule that is included with the cutter.
• Let the rebar cutter penetrate at it's own rate.
• Watch for the gray dust the rebar generates.
• When the gray dust disappears, your are through the rebar!
• For best results, always use a sharp bit.